Tube Cleaners

We, at KB industries manufacture excellent range of Tube cleaner, which are ideal for cleaning tube and piping of boiler, heat exchanger and condenser. We offer boiler tube cleaner and heat exchanger, tube cleaner along with their accessories like tube cleaning brush and tube cleaning cutter at a very reasonable rate.

• Condenser Tube Cleaner
Condenser Tube Cleaners offered by us, comprise tube cleaners that find application in cleaning of carbide drills, brushes for light deposits, severely clogged tubes as well as buffing tools for final polishing. These are also shock resistant, thus proving superior for applications that where use of electric equipment is hazardous.


• Portable Electric Tube Cleaner
It is a portable machine which can be carried by technician on the move. Flexible shaft rotates at speed of 1740 rpm and water gets injected simultaneously through the nylon casing to the cleaning tool. As the tool removes the deposits, the water flow flushes them out. A solenoid valve ensures that water flows only when machine is running.


• Boiler Tube Cleaning Machine
KB industries make Boiler Tube Cleaning Machine (Electrically Driven), which is a self-contained portable unit, mounted on a 3-wheel trolley, fitted with a carrying handle. It incorporates a directly coupled, totally enclosed squirrel cage, 2800 rpm. continuously rated electric motor. Selecting the H.P. of the motor depends upon length and size of Flexible Shaft and nature of scaling. It is controlled by a push button starter which is provided with three thermal adjustable overload relays. Each machine is fully wired, carefully tested and is fitted with a 10-feet length of PVC Cable to main supply. Longer cable can be supplied upon request. Please consult us if your electric supply is different from listed below. Motors for alternate supplies are also available.


• L-PFS Flexible Shaft (Nylon Casing )
Specifications:
For Tubes Internal Diameter - 1/4" To


• L-PFS Flexible Shaft (Steel Casing )
Specifications:
For Tubes Internal Diameter - 1"


• Buffing Tools
Specifications:
For Tubes Internal Diameter - 1/4" TO 3" I.D


• Cup Brush Tools - Brass or stainless steel
Specifications:
For Tubes Internal Diameter - 1/2" - 3/4" I.D


• Wheel Brush Tools - Brass or stainless steel
Specifications:
For Tubes Internal Diameter - 1/2" - 3/4" I.D


• Wheel Brush Tools - Brass or stainless steel
Specifications:
For Tubes Internal Diameter - 1/2" - 3/4" I.D


• Nylon Brush -Stainless steel - Brass
Specifications:
Brush O.D - 1/4" To 4"


• Drill Tip Double Dia. Bushes, Drill Tip Nylon Brush, Drill Tip Brass Brush
Specifications:
For Tubes Internal Diameter - 5/8" To 1.1/4"


• Condenser Tube Cleaning Brush


• Chiller Tube Cleaning Brush


• Carbon Steel Brush
Specifications:
Brush O.D - 5" To 14"


• Expanding Brush
Spring operated, self-expanding tools are used to remove light scale in straight or curved tubes. The spring action ensures constant and positive contact of the brush with tube walls ensuring a remarkably smooth operation, which produces a high standard of finish.


• Shoot Thru Brushes
Orange Nylon (Wood Dowel for soft deposits)
Orange Nylon (Plastic Dowel for soft deposits)
Nylon Brush (Rubber ends for soft deposits)
Specifications:
Tubes O.D RANGE - 3/8" To 1.1/4"


• Colour Coded Shoot Thru Brushes
In most cases hard Tube Scrubbers are recommended for removing light to medium deposits in condensers. They work by being 'Shot Thru' the tubes with high-pressure air gun.
Specifications:
For Tubes Internal Diameter - 0.495" to 1.106"


• Carbide Drills
Carbide Drills for Heavily Choked Tubes
Specifications:
For Tubes Internal Diameter - 1/4" To 1"


• Triangular Wire Scraping Tools
These tools use firm triangular wires that 'scrape' off tough and hard scale deposits in ferrous tubes. The tools can be used in one direction only because of their construction.
Specifications:
For Tubes Internal Diameter - 5/8 " To 1"


• Wheel Brush Tools -
CIRCULAR BRUSH TOOLS FOR STRAIGHT TUBES
These tools consist of 4 stainless steel circular brushes that are mounted on a shaft and connected to a Universal Joint. These tools are used to clean soft to medium scales. Replacement circular brushes can be ordered when wear starts.
Specifications:
Brush O.D - 1" To 3"


• Combination Cone Carbide Drill Tool
These combination tools use the extreme hardness of a carbide drill coupled with the ergocentric cleaning properties of cone cleaning cutters to drill through and simultaneously clean tubes that are choked with very hard deposits.
Specifications:
Brush O.D - 23.8" To 49.2


• Carbide Cone Tool
These are egocentric cutters to clean hard scale from typically larger tubes that are found in boilers. The ergocentric cutters ensure that the same tooth does not touch the same spot when cleaning and prevents grooves being formed in the tube scale. All cone cutter tools are fitted with universal joints to negotiate bends in curved tubes One Cone Tool: These consist of of 1 Cone fitted onto a Universal Joint and are used when scale build up is not severe. Two Cone Tool: These consist of of 2 Cones fitted onto a Universal Joint and are used when scale build up is not severe. Three Cone Tool: These consist of 3 Cones fitted onto a base which is fitted with a Universal Joint and are used for cleaning larger (2.5/16" I.D. and up) tubes where scale build up is severe.
Specifications:
CURVE TUBE I.D - 30.2mm to 103.2mm


• Cylinder Cutter Tool
These cleaning tools are used typically in boilers and other larger tubes that have a light to medium deposit.
Specifications:
For Tubes Internal Diameter - 36.5mm to 98.4mm


• Stiff Arm Cutter
These cleaning tools use long stiff with cone at the end, that spread out when rotated. These cleaning tools are used to clean light to medium deposits in large diameter tubes and pipes.
Specifications:
For Tubes Internal Diameter - 36.5mm to 98.4mm


• Flexible Arm Cutter
These cleaning tools use long stiff arms with cone cutters on their ends, that spread out when rotated. These cleaning tools are used to clean light to medium deposits in large diameter tubes and pipes.
Specifications:
For Tubes Internal Diameter - 100.0mm to -309.0mm


• Flexible Arm Carbide Ball Tip
These tube cleaning tools are similar in operation to the Flexible Arm Cutter Wing Tools except these use carbide balls for removing light scale in large diameter tubes and pipes.
Specifications:
For Tubes Internal Diameter - 23.8mm to 204.8mm


• Flexible Nylon Rod Brush
These tube cleaning tools are fitted with abrasive nylon rods that spread out when rotated. These tube cleaning tools are used to tube cleaning light deposits in thin tubes and pipes of exotic materials where damage to tubes is to be avoided.
Specifications:
For Tubes Internal Diameter - 49.2mm-431.8mm